No announcement yet.

2003 Infiniti G35 for sale 6MT 4dr

  • Filter
  • Time
  • Show
Clear All
new posts

  • 2003 Infiniti G35 for sale 6MT 4dr


    Putting out a feeler for my 2003 G35 6MT Aero sedan-Toronto area. It can be used as a base for time attack car project(strip it and put a cage in it) or driven daily-it is street legal(emissions equipment is intact), full leather interior and all switches and buttons work.
    Car seen quite a lot of track time(but not track abuse!) and you probably seen it at track days and autocross events. I am using it as my winter car-it did not see track since 2014. I ran best of 2.11 at Shannoville full track on Falken Azenis 615.
    It is 1650 kg with driver on scales.
    Here's what you are getting:
    Stock original with 215K km. Custom intake with Apexi filter and plenum spacer. Eats about 1 liter of oil every 5 months(or 5k km). Synthetic since 35K
    Changed within last 3 years(all parts are Nissan OEM and NOT ebay generic parts):
    Walbro 250 fuel pump
    New(remanuf) injectors
    New camshaft pos sensors
    New throttle body
    New MAF sensor
    New drivers side cam cover(to fix spark plug oil leak)
    Engine was always on the strong side with 235 WHP on Dynojet with just exhaust and intake. It was 250 WHP on Dynopack after Up-rev tuning by APH Dyno-this is 260hp factory rated sedan.
    Tanabe exhaust with Skunk muffler.
    Stock cats

    Engine management-I own Uprev license which is not installed right now. I can probably transfer it-need to talk to dealer

    Stock original, synthetic fluids only.
    ACT Streetlite Flywheel
    Clutch is Exedy OEM, about 50K on it
    Powertrain industries 1 piece aluminum driveshaft with fully rebuildable yokes
    Quaife differential
    Whiteline diff carrier poly bushings
    Whitelline rear subframe poly bushings

    Kinetix front camber adjustable A arms(spare ball joints included)
    Most of the f/r bushings are Whiteline polyurethane
    Tein inner and outer tie rods
    GT Spec braces-1 in the front, 2 in the back
    Upper strut tower brace
    Adjustable toe /camber arms in the rear(Eibach)
    Eibach adjustable front sway bar
    Progress Technology adjustable rear sway bar
    Shocks-front stock(red)
    Rear-Tokico D specs
    350Z Springs

    Front-Wilwood Forged Supelight 4 pot calipers with 350Z Track brembo rotors(I have BP-10, BP 20 and Polymatrix pads with different wear and plenty of life left). Extra O rings and bleeder valves are included for caliper rebuilt.
    Rear-stock from base 2016 370Z
    SS brake lines all around

    Factory excellent condition, no tears on seats, all power functions work.
    Clarion DVD sat nav with JDM double din conversion.

    Stock 5 spoke with winter Hankook iPike 215-55-17. No summer tires. Full size spare

    No surface rust. Zero. Underbody is very clean.
    Quite a lot of stone chips on front bumper
    3 doors were replaced by Infiniti due to pillar rust in 2008

    Known issues:
    -Parking brake is useless since day one. Never bothered to replace.
    -Fuel filler door lock does not work. It is always unlocked
    -Ignition coils are Australian Yellow Jackets-performed well while new but one has recently failed-replaced with OEM. Might be at the end of their life?
    -Shocks have a lot of KM on them-no issues, but they are not track worthy.
    -Might be a vacuum leak-idle is very solid, but can flutter once in a while when cold.

    I have receipts for almost every upgrade.

    Please PM me your questions.

    Price $6,000 CAD

    Thank you for looking!

    Attached Files
    Last edited by obender66; 03-19-2017, 05:06 PM.