From the Honda Michelin Challenge series. I bought these brand new in box from a forum member last year and installed them on my track Civic. Unfortunately, I crashed the car earlier this month and am now parting it out. If I were building another Civic SiR, I would definitely keep these, as they are really built to a high standard and are actually livable on the street too.
I drove about 5 000 km on them and the car was stored in winter.
Here are some specs:
- Set of 4 dampers, springs and mounts.
- Front camber adjustable by upper mount plate/spherical bearing.
- Tie rod mount/steering arm repositioned for proper bump steer at lower ride height.
Hyperco main and helper springs:
Front - 2.25" ID x 8"L, 350 lb-in rate
Rear - 2.25" ID x 8"L, 800 lb-in rate
This is a photo from before I installed them
Parts are in Montreal, but I can ship.
One complete set of 4 dampers, springs and mounts. New, unused, still in original cartons.
For 2004-2005 Civic coupe (may also fit others if dimensions and mounts permit).
- Front camber adjustable by upper mount plate/spherical bearing.
- Tie rod mount/steering arm repositioned for proper bump steer at lower ride height.
Hyperco main and helper springs:
Front - 2.25" ID x 8"L, 350 lb-in rate
Rear - 2.25" ID x 8"L, 800 lb-in rate
One complete set of 4 dampers, springs and mounts. New, unused, still in original cartons.
For 2004-2005 Civic coupe (may also fit others if dimensions and mounts permit).
- Front camber adjustable by upper mount plate/spherical bearing.
- Tie rod mount/steering arm repositioned for proper bump steer at lower ride height.
Hyperco main and helper springs:
Front - 2.25" ID x 8"L, 350 lb-in rate
Rear - 2.25" ID x 8"L, 800 lb-in rate
Here are some pics from before I installed them:


Original ad:
I drove about 5 000 km on them and the car was stored in winter.
Here are some specs:
- Set of 4 dampers, springs and mounts.
- Front camber adjustable by upper mount plate/spherical bearing.
- Tie rod mount/steering arm repositioned for proper bump steer at lower ride height.
Hyperco main and helper springs:
Front - 2.25" ID x 8"L, 350 lb-in rate
Rear - 2.25" ID x 8"L, 800 lb-in rate
This is a photo from before I installed them
Parts are in Montreal, but I can ship.
One complete set of 4 dampers, springs and mounts. New, unused, still in original cartons.
For 2004-2005 Civic coupe (may also fit others if dimensions and mounts permit).
- Front camber adjustable by upper mount plate/spherical bearing.
- Tie rod mount/steering arm repositioned for proper bump steer at lower ride height.
Hyperco main and helper springs:
Front - 2.25" ID x 8"L, 350 lb-in rate
Rear - 2.25" ID x 8"L, 800 lb-in rate
One complete set of 4 dampers, springs and mounts. New, unused, still in original cartons.
For 2004-2005 Civic coupe (may also fit others if dimensions and mounts permit).
- Front camber adjustable by upper mount plate/spherical bearing.
- Tie rod mount/steering arm repositioned for proper bump steer at lower ride height.
Hyperco main and helper springs:
Front - 2.25" ID x 8"L, 350 lb-in rate
Rear - 2.25" ID x 8"L, 800 lb-in rate
Here are some pics from before I installed them:


Original ad:
