SOLD
My race car for sale
2680lbs with 3/4 tank
Safety/Interior
8 points roll cage with sub frame tied in, and reinforced rear subframe.
OMP fire suppression system Installed 2018
Schroth Profi II 6 points harness installed 2018
Sparco Circuit II with BK seat mount(low profile) installed 2017
Lifeline quick release
VAC Samsonas shifter
Sparco 330mm steering wheel
MPR helmet hook
Aluminium trunk floor
Aero
Bimmerworld rear wing
Custom front splitter, air dam, and canards
Motor/drivetrain
100% stock motor with new rod bearings, fully rebuilt vanos
redrilled vanos pump disk
ATI VAC harmonic damper
Clutchmaster lightweight clutch, and flywheel kit
Burger motorsport catch can
Lightweight water pump, power steering, and alternator pulleys
New alternator
Valves adjusted
Custom Epic Alpha N tune, with custom intake 342whp 265tq
JVT race headers
Bimmerworld race exhaust
Stock 6spd tranny
stock differential with 4.10 gears (2018 rebuild)
Solid mounts for the motor, tranny, stearing guibo, and diff
Brakes
AP racing 4 pot front
Stock rear
PFC 11 pads
BMW motorsporst MK60 ABS standalone
Exterior
Lexan windows with naca duct
Vented hood
Vented front fenders
Fog light blanks
Suspension / wheels
JZR RS Dampers (rebuilt 2018)
Hotchkis front swaybar
Bimmerworld sway bar links
Rear sway bar delete
Apex 18x9.5 Et35 race wheels
Stock OEM rain wheels
D Force practice wheels
Comes with technical support, a boat load of spares, and a trailer
The 2018 set up was about 1.5 seconds faster than last year.
Never had the chance to run sticker tires this season, but it ran 2 races, and was very promising.
2:14.00 at Calabogie on old tires
1:10.9 Shannonville Pro track on old tires
Should be in the 1:26 at Mosport but we'll never know
54:20 ASE
1:36.88 at ICAR
It's ready to race, and win,
The only bad part is that the body is not in the best condition. Not a show car for sure.
Perfect to race, and not worry about paint chips, and donuts on your doors
Engine oil changed every weekend (Gulf Racing oil)
And all regular maintenance like wheel bearings, and tie rods ect done.
My race car for sale
2680lbs with 3/4 tank
Safety/Interior
8 points roll cage with sub frame tied in, and reinforced rear subframe.
OMP fire suppression system Installed 2018
Schroth Profi II 6 points harness installed 2018
Sparco Circuit II with BK seat mount(low profile) installed 2017
Lifeline quick release
VAC Samsonas shifter
Sparco 330mm steering wheel
MPR helmet hook
Aluminium trunk floor
Aero
Bimmerworld rear wing
Custom front splitter, air dam, and canards
Motor/drivetrain
100% stock motor with new rod bearings, fully rebuilt vanos
redrilled vanos pump disk
ATI VAC harmonic damper
Clutchmaster lightweight clutch, and flywheel kit
Burger motorsport catch can
Lightweight water pump, power steering, and alternator pulleys
New alternator
Valves adjusted
Custom Epic Alpha N tune, with custom intake 342whp 265tq
JVT race headers
Bimmerworld race exhaust
Stock 6spd tranny
stock differential with 4.10 gears (2018 rebuild)
Solid mounts for the motor, tranny, stearing guibo, and diff
Brakes
AP racing 4 pot front
Stock rear
PFC 11 pads
BMW motorsporst MK60 ABS standalone
Exterior
Lexan windows with naca duct
Vented hood
Vented front fenders
Fog light blanks
Suspension / wheels
JZR RS Dampers (rebuilt 2018)
Hotchkis front swaybar
Bimmerworld sway bar links
Rear sway bar delete
Apex 18x9.5 Et35 race wheels
Stock OEM rain wheels
D Force practice wheels
Comes with technical support, a boat load of spares, and a trailer
The 2018 set up was about 1.5 seconds faster than last year.
Never had the chance to run sticker tires this season, but it ran 2 races, and was very promising.
2:14.00 at Calabogie on old tires
1:10.9 Shannonville Pro track on old tires
Should be in the 1:26 at Mosport but we'll never know
54:20 ASE
1:36.88 at ICAR
It's ready to race, and win,
The only bad part is that the body is not in the best condition. Not a show car for sure.
Perfect to race, and not worry about paint chips, and donuts on your doors
Engine oil changed every weekend (Gulf Racing oil)
And all regular maintenance like wheel bearings, and tie rods ect done.
Comment